How do I remove the blade cover on my Cordless Saw

Quick Answer

On some cordless garden saw models, the blade cover (or blade sheath) is designed to fit tightly for safety during storage and transport.

If it feels difficult to remove, firmly pull the cover away from the blade while gently wiggling it from side to side. It should come off with a steady, firm pull.

Before You Start

Before removing the blade cover:

• Ensure the saw is switched off
• Remove the battery pack
• Place the saw on a stable surface
• Wear protective gloves when handling the blade

Important: Never attempt to remove the blade cover while the battery is installed.

How to Remove the Blade Cover

Follow these steps:

1. Hold the saw securely

Grip the handle firmly with one hand while keeping the blade pointed away from yourself.

2. Pull the blade cover

Grip the blade cover securely and pull it straight away from the blade.

Some models have a very tight-fitting cover to prevent it from coming loose during transport.

3. Wiggle if necessary

If the cover does not come away immediately:

• Gently wiggle it from side to side
• Continue pulling firmly until it slides off

Do not use excessive force or sharp tools to remove the cover.

4. Refit the blade cover

When storing the saw:

• Align the cover with the blade
• Push it firmly back into place until it is fully seated

A snug fit is normal and helps protect both the blade and the user.

Important Tips

• Always remove the battery before fitting or removing the blade cover
• Wear gloves to protect your hands from the sharp blade
• Do not use tools to prise the cover off
• Store the saw with the blade cover fitted when not in use

Frequently Asked Questions

Why is my blade cover so tight?

Some models are designed with a tight-fitting blade cover to prevent it from coming loose during transport or storage.

Is it normal to have to pull hard?

Yes. A firm pull is often required to remove the cover on some models.

Can I twist the cover to remove it?

Yes. Gently wiggling the cover while pulling can help loosen it, but avoid excessive twisting or using tools.

How do I put the blade cover back on?

Simply align it with the blade and push it firmly into place until it is fully fitted.